Table Fire Pit

All products are handmade; meaning no two concrete designs are the same. There are unique colors, patterns, and bubbles with each item. All products are sustainable, non toxic and water-resistant. *Soap Holder waterproof.

Non-toxic ingredients: concrete, pigment, food grade: sealant & varnish, wood or silicone corks, super glue

All products are made to order with a 3-week turnaround time. We will email you once your order is ready to schedule a pick-up time.

*Clean with soap and a sponge only. We do not recommended using an abrasive scrub or soaking in water.

*Not microwave or dishwasher safe.

*Will break if dropped

*All concrete items are sealed and varnished, adding a matte finish. Sealing & varnishing concrete does not mean it is stain proof just stain resistant. Particularly with the white and lighter items, anything that will stain a white shirt will stain these pieces. Concrete even sealed and varnished is very absorbent. 

1. Place fire pit on cork

2. Pour approximately 2 layers of fire glass in base of fire pit.

3. When placing copper cup in firer pit the bottom of cup should be flat and the top of cup just above the top of fire pit. Being just above level of pit helps glass and top of pit from getting yellow from the fire, some yellowing my occur.

4. Gently place fingers over cup keeping glass from falling in cup.

5. Sprinkle fire glass evenly around cup. The fire glass creates a barrier of protection keeping the concrete from cracking.

6. We recommend 91% Alcohol, NOT 70%. 70% leaves water in the bottom of cup and you will have to dump it out and reset up your pit.

7. Have rag handy.

8. Fill pit 1/4 from top of cup with 91% Alcohol. Immediately wipe any alcohol that dripped on fire glass or pit before lighting. Alcohol will leave spots on pit.

9. Lit and enjoy approximately 25 minutes of fire time.

10. Use fire smuggler to extinguish.